Tuesday, September 27, 2011

I had a plan ...

A soap plan. The next time I have such a plan, I will run it by an engineer.

The plan was a CinnaMint soap, half red, half green. Not layered, but side by side colors. So, I took a piece of cardboard cut the length and depth of my mold. I covered it with freezer paper (same thing I use to line my molds with). I placed it snuggly lengthwise down the middle of my mold.

Before I split my batch in half I debated ... make one side cinnamon, the other side mint? Nah, I said, make it ALL cinnamint. And I debated .... add the cinnamint all at once and then split the batch, or split the batch and add the cinnamint to each batch as I work on it? Nah, I said, add it all, then split the batch.

I did the green side first, using French green clay with just a pinch of green oxide to color. Mixed and brought it to trace, and started pouring it into one side of the mold. This is where an engineer would have been handy. A dam engineer. Because, of course, my dam wasn't going to hold just a settin there! DUH The only thing I could find in a hurry was a couple of plastic cups that individual applesauce comes in, that I use for mixing oxide with. I stuffed 3 of them along the other side of the "dam", and continued pouring my green soap. Yey, it worked! The dam held!

By the time I got to the other batch for the other side, it was already a thick trace. I debated .... keep it uncolored, or try to beat the clock and add the color? Add the color. Rose clay and a pinch of red iron oxide. Mixed it as fast as I could, even took a chance and hit it with the stick blender. It was still just barely pourable, so I removed the middle "dam holder" and stared pouring .. well, more like scooping it into the mold. Removed one of the other dam holders, kept scooping, removed the last dam holder, scooped and scraped the pot clean. Then, took hold of the divider and slowly pulled it straight up and out of the mold. Did a little frosting swirl down the middle to blend them a bit. And pounded that mold on the counter a few times to get rid of any air holes.

Not too bad! Now, I can't wait to cut it, see if I got all the air holes out of it.


(the pictures are not very good because a storm just rolled in and it was rather dark out, so poor lighting. But click on the photos to enlarge)




I also made a batch of Lavender soap, Just plain, uncolored, good smelling Lavender. No drama.

3 comments:

Sheryl said...

I love how you shared your thought processes and all the decisions you had to make, instantly. Soap making is really like that! How did it turn out?

Donna OShaughnessy said...

Just found your blog. I'm a new soaper AKA bad soaper, and it seems I am going to copy, I mean LEARN FROM you. Beautiful soaps

Anne-Marie said...

Cinnamint sounds like the perfect fall fragrance. I how the soap turned out, and the colors together! =)